ACL 300B Precision Electrostatic Locator Meter
Measures static charges instantly from 0 - 30,000 volts reliably.
• Most widely used electrostatic locator
• Designed for close and repetitive readings
• Uses standard 9 volt battery with battery test feature
• Low drift, repeatability + / - 1 %

ACL 350 Digital Static Locator
• Non-contact meter that indicates electrostatic field voltage & polarity on charged particles
• Power on / hold & zero button
• Auto shut off after 90 seconds
• Easy to read 3 - 1/2 digit LCD display automatically updates three times per second
• Measures voltages in many applications ( packaging, production aids & raw materials
• Range 0 - 80,000 volts

ACL 385 Surface Resistivity
The first "wide range" hand held surface meter. Compact meter measures both surface resistivity and resistance to ground with test range from 10' 3 - 10' 12 Ohms per square.

• Simple repeatable measurements of conductive, static dissipative and insulative
   surfaces by the ASTM standard D - 257 method of parallel bar sensing.

ACL 386 Resistance Indicator
Designed to test all conductive, anti-static dissipative surfaces for electrical resistivity/resistance
• Test range 10' 3 - 10' 12 Ohms/square
• Conforms to ESD standards S4, 1, S7 & S11, 11
• Auto shut off with zeroing feature

ACL 390 Resistance Meter
The ACL 390 meter gives the advantage of an expensive and cumbersome Megohmmeter at an economical price and a compact convenient size. Use the built in electrodes or the optional weight kit to comply with industry standards.
ACL 391 Accessory Kit - External probes will meet industru standards for testing resistance point to point (RTT) and volume resistance. Includes crrying case (with foam lining) two 5lb probes and test leads.
• Measures resistance to ground (RTG)
• Measures resistance point to point (RTT)
• Test range 10 3 - 10 12 ohms
• Automatically generates a 10v or 100v test voltage
• Test results shown in multi-colored LERD display
• Size
• +/- Accuracy: 10%
• includes ground cord and case

ACL 400 Ionised Environment Electrostatic Locator
The wide range & ease of accurate repetitive measurements make this meter ideally suited for ESD control applications in today's ionized environment.

ACL 600 Stati-Check Meter
A unique visual method is provided by the ACL 600 to detect how much static charge a person is carrying.
• Can be easily wall mounted outside of a sensitive area to provide voltage readings
   on persons entering
• Provides a repetitive read for operators already present in the area
• Effective in detecting the difference in static potential between two people
• Determines the effectiveness of wrist straps, coil, cords, bonding plugs, custom
   floors, spray coating, garments & chairs

ACL 750 Combo Tester Kit with Software
• Used to monitor & analyse wrist straps & heel straps grounders simultaneously
• Easy to use software; stores employee test results in computer
• Conforms to ISO - 9000 requirements
• Measures electrical resistance of wrist straps / heel grounders from 500 kilohms
   to 100 megohms
• Software can store reports up to 2,500 employees
• Installed on any Windows 95 & 98 or 3.1 compatible PC ( except Windows 3.1 for
   workgroups )
• Includes meter, Windows based software and heavy duty foot stand

ACL 775 Constant ESD Floor Finish Monitor
• Designed to monitor floors 24 hours per day in high traffic areas for high
   electrical resistance
• Values greater than 2 x 10' 10 Ohms will activate buzzer and red LED
• Can be mounted to floor or wall
• Eliminates daily spot testing

ACL 800 Megohmmeter
• Designed to measures temperature, humidity & electrical resistance / resistivity
• Compact, lightweight & portable
• Uses both external & internal test probes to measure resistivity / resistance between two points, and resistance to ground according to EOS/ESD Association Standards, - S4.1 , S7.1 , S11.11 and European Standard CECC - EN 1000 / 15